• Order
  • QAT
  • Offers
  • Support
    • Due to unforeseen circumstances, our phone line will be unavailable from 5pm to 9pm GMT on Thursday, 28th March. Please be assured that orders will continue to be processed as usual during this period. For any queries, you can still contact us through your customer portal, where our team will be ready to assist you.

      March 28, 2024

  • Sign In

Disclaimer: This is an example of a student written essay.
Click here for sample essays written by our professional writers.

Any opinions, findings, conclusions or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of UKEssays.com.

Non Response Bias Test Business Essay

Paper Type: Free Essay Subject: Business
Wordcount: 4404 words Published: 1st Jan 2015

Reference this

This chapter intends to indicate the results based on the analysis of data collected using Structural Equation Modeling. This data collected is screened, validated and analyzed by using factor analysis and the internal consistency procedure of reliability analysis, correlation estimation, convergent validity analysis, discriminant validity, confirmatory factor analysis (CFA), and Structural Equation Modeling (SEM). The results of the analysis are presented using statistical packages, Analysis of Moment Structures (AMOS) and Statistical Package for the Social Sciences (SPSS). Hypothesis testing is used to examine the relationship between the variables of learning organization, organizational innovativeness, and organizational performance.

Get Help With Your Essay

If you need assistance with writing your essay, our professional essay writing service is here to help!

Essay Writing Service

4.2 Non-Response Bias Test

Non-response bias test was undertaken because this type of bias affects the interpretation of the variables and subsequently affects the overall conclusions resulted from the data analysis. Evidence from existing literatures have established that the non-respondents sometimes differ systematically from the respondents both in attitudes, behaviors, personalities, motivations, demographics and/or psychographics, in which any or all of which might affect the results of the study (Malhotra, Hall, Shaw, Oppenheim, 2006).

Non-response bias was assessed by comparing the responses in the questionnaires between the early and late returns (Armstrong & Overton, 1977, Churchill & Brown, 2004, Malhortra et al., 2006). Non-response bias has been tested using the t-test to compare the similarities between mean, standard deviation, and standard error mean of the demographic data of the last 60 percent of the respondents (number of cases = 238) to the data of the first 40 percent of the respondents (number of cases = 160). According to the results as shown in Table 4.1, the responses indicate no significant differences between each group. Therefore, non-response bias has no significant impact in this study.

Table 4.1

Test of Non-Response Bias between Group Differences of Early 40 percent and Late 60 percent

Variable

Response

Number of Cases

Mean

Standard Deviation

Standard Error Mean

Gender

Early

160

1.280

0.451

0.036

Late

238

1.300

0.458

0.030

Type of Business

Early

160

1.430

0.497

0.039

Late

238

1.470

0.500

0.032

Experience

Early

160

3.140

0.759

0.060

Late

238

2.990

0.787

0.051

Position

Early

160

1.310

0.465

0.037

Late

238

1.300

0.460

0.030

Number of Employees

Early

160

1.900

0.301

0.024

Late

238

1.890

0.307

0.020

Age of Business

Early

160

2.530

0.501

0.040

Late

238

2.550

0.499

0.032

International Business

Early

160

1.510

0.502

0.040

Late

238

1.450

0.498

0.032

4.3 Data Screening and Outliers

This section considers each part of the data screening and investigates the root cause of data error that may impact the final outcome. The data screening observes the data position for all remaining data. All data is entered into SPSS version 20 and analyzed using AMOS version 18.0. Data screening includes outlier checking, missing data, descriptive statistic, univariate normality, multicollinearity, reliability, and validity testing.

4.3.1 Outlier Checking (Mahalanobis Distance)

Statistical evidence has established outliers as any observations, which are numerically distant if compared to the rest of the data set (Bryne, 2010). There is existing research literature that uses different methods of detecting outliers among which are includes classifying data points based on an observed (Mahalanobis) distance from the research expected values (Hair et al., 2010; Hau & Marsh, 2004). The constructive argument in favor of outlier treatments based on Mahalanobis distance is that it serves as an effective means of detecting outliers through the settings of some predetermined threshold that will assist in defining whether a point could be categorized as outlier or not.

For this research, chi-square statistics has been used as the threshold value to determine the empirical optimal values in the research. This decision is in line with the arguments of Hair et al. (2010) which emphasized on the need to create a new variable in the SPSS excel to be labelled ‘No.’ numbering from the beginning to the end of all variables. The Mahalanobis can simply be achieved by running a simple linear regression through the selection of the newly created response number as the dependent variable and selecting all measurement items apart from the demographic variables as independent variables. Consequently, a new output is created called Mahalanobis1 (Mah1), upon which a comparison was made between the chi-square value and a maximum of Mahalanobis distance value in Table 4.2, which also includes the new Mahalanobis output.

Table 4.2

Outlier Detection (Mahalanobis Distance)

Min.

Max.

Mean

Standard Deviation

Number of Cases

Predicted Value

-6.32

451.63

199.50

77.192

398

Standard Predicted Value

-2.666

3.266

.000

1.000

398

Standard Error of Predicted Value

5.899

59.259

28.507

6.600

398

Adjusted Predicted Value

-31.67

463.81

198.32

78.266

398

Residual

-253.756

193.111

.000

85.293

398

Standard Residual

-2.817

2.144

.000

.947

398

Deleted Residual

-270.853

226.881

1.179

94.793

398

Mahal. Distance

.706

170.845

40.897

18.576

398

Note. Min. = minimum; Max. = maximum

The value of Mahalanobis Distance (D2) is greater than a critical value and used as the threshold level for D2/df measure which should be conservative level of significance (0.005 or 0.001) for designation on outliers (Hair et al., 2010). D2 is known as the Mahalanobis distance and is the distance between each observation in multidimensional space from the mean centre of all the observations. Df is the degree of freedom, or the number of variables involved (Hair et al., 2010).

For this study, the maximum of Mahalanobis distance is 170.845 as shown in Table 4.2 greater than the critical value. The critical value mentioned in chi-square value is 74.745 at df=41, p=0.001 (refer to Appendix D). This means there are 6 respondents of the total of 398 respondents that were deleted. The screening data of these outliers and the final regression in this study were performed using the remaining 392 samples in the data set.

4.3.2 Missing Data

Once the questionnaire data are collected, the first step in data screening is to identify the data errors. The extent of missing data affects the unit data putting at risk the analysis result. Normally, missing data under 10 percent for an individual case or observation can generally be ignored, except when the missing data occurs in a specific nonrandom fashion such as concentration in a specific set of questions and attrition at the end of the questionnaire (Hair et al., 2010). In this study, the missing data (refer to Appendix E) does not exist in every questionnaire. Therefore, this study determines the number of cases without missing variables, which provide the sample size variable for data analysis still remedies.

4.3.3 Descriptive Statistic

The following profile was found among the data screening process. In general, the descriptive latent constructs include maximum, minimum, mean, standard deviation, mode, and median. The nine latent constructs (continuous learning (CL), inquiry and dialogue (ID), team learning (TL), embedded system (ES), empowerment (EM), system connection (SC), strategic leadership (SL), organizational innovativeness (OI), and organizational performance (OP) are presented in Table 4.3.

Table 4.3

Descriptive Statistics of Variables

Number of Cases

Missing Data

Mean

Standard Deviation

Continuous Learning

392

0

3.169

1.263

Inquiry and Dialogue

392

0

3.379

1.147

Team Learning

392

0

3.304

1.223

Embedded system

392

0

3.401

1.134

Empowerment

392

0

3.480

1.129

System Connection

392

0

3.098

1.294

Strategic Leadership

392

0

3.361

1.174

Organizational Innovativeness

392

0

3.342

0.945

Organizational Performance

392

0

2.998

1.037

The mean value of the nine constructs are based on 41 questions. Organizational performance (OP) is lowest for mean value (2.998) while the highest mean is empowerment (EM = 3.480). For standard deviation, system connection (SC) is the highest value (1.294), continuous learning (CL) is 1.263, team learning (TL) is 1.223, strategic leadership (SL) is 1.174, inquiry and dialogue (ID) is 1.147, embedded system (ES) is 1.134, empowerment (EM) is 1.129, and organizational performance (OP) is 1.037, but the lowest value is the organizational innovativeness (OI) with 0.945.

4.3.3.1 Demographic Profile of the Respondents

The demographic profile of the participants SMEs characteristic consists of the seven major items as follows: (1) gender, (2) type of business, (3) experience, (4) position, (5) number of employees, (6) age of business, and (7) international business. The analysis results of the before mentioned variables are presented in Table 4.4 and Appendix F. The results are shown as the frequency and percentage.

Table 4.4

The Demographic Profile of the Respondents consist of the Seven Major Items

Demographics

Frequency

Percentage

Gender

Male

Female

280

112

71.4

28.6

Type of business

Manufacturing

Service

216

176

55.1

44.9

Experience of work (in this business)

More than 5 but less than 7 years

More than 7 but less than 9 years

More than 9 years

109

153

130

27.8

39.0

33.2

Position

Owner

Manager

272

120

69.4

30.6

Number of employees

1-50

51-200

40

352

10.2

89.8

Age of business

6-10 years

More than 10 years

180

212

45.9

54.1

International business

Yes

No

207

185

52.8

47.2

Table 4.4 shows the demographic information of all respondents. A total of 398 (39.8 percent) useable responses were obtained out of the 1,000 questionnaires sent. According to Sekaran (2003) the minimum of 10 percent response from the sample justifies the rational to start and perform the analysis. In this study, the business owner or managers were identified as the key informants. They are considered the most appropriate as they are the best positioned personnel to have the broadest knowledge of the overall issues under investigation.

Find Out How UKEssays.com Can Help You!

Our academic experts are ready and waiting to assist with any writing project you may have. From simple essay plans, through to full dissertations, you can guarantee we have a service perfectly matched to your needs.

View our services

Based on the data from Table 4.4, the majority of the respondents were male with a total of 280 respondents (71.4 percent), while female respondents accounted for 28.6 percent (112 respondents) from the total sample. The business type of manufacturing had the highest number of respondents with 216 (55.1 percent). Other type (service business) with 176 respondents accounted for 44.9 percent.

130 respondents or 33.2 percent indicated that they have had more than 9 years experience in business, whereas the highest level of business experience was more than 7 years but less than 9 years with 153 respondents or 39.0 percent. 109 respondents or 27.8 percent indicated that they have had more than 5 years but less than 7 years experience in business.

272 or 69.4 percent of the respondents were owners, while 120 respondents or 30.6 percent were managers. From these analyses, it can be concluded that the majority of the respondents were from the manufacturing and service businesses, they were owner or manager and have sufficient knowledge to be in this industry.

89.9 percent or 352 respondents were of a medium size business with between 51 and 200 employees, whereas 10.2 percent or 40 respondents were of a small size business with less than 50 employees.

212 respondents or 54.1 percent indicated that their businesses have been established for more than 10 years, 180 respondents or 45.9 percent established from 6 to 10 years.

Finally, 207 respondents or 52.8 percents are international businesses, and 185 respondents or 47.2 percent are domestic businesses.

4.3.5 Univariate Normality

Univariate normality computation is conducted using z-scores of skewness statistics, standard error of skewness as well as kurtosis statistics to analyze the dataset. The z-score of skewness more than 3 needs to be transformed since it is considered as non-normal data (Hair et al., 2010). This study found that the absolute of minimum and a maximum skewness value indicated normal distribution because the value z-score is below 3 (refer to Appendix G). Therefore, data distribution is individually normal.

4.3.6 Multicollinearity Tests

The multicollinearity was examined using the variance inflation factor (VIF) measures and tolerance value. The result of VIF and Tolerance for all variables under study as shown in Table 4.5 found that VIF values were ranged between 1.586 to 2.239 that were below the threshold value of ten (<10) and tolerance value of all variables were ranged between 0.447 to 0.631 that is substantially more than 0.10 (Hair, Black, Babin, & Anderson, 2009). The VIF and tolerance of the variables indicated that there was not evidence of severe collinearity between the independent variables.

Table 4.5

Multicollinearity Test – Variance Inflation Factor (VIF) and Tolerance

Variables

Collinearity Statistics

Tolerance

Variance Inflation Factor (VIF)

Continuous Learning

.561

1.784

Inquiry and Dialogue

.536

1.865

Team Learning

.575

1.738

Embedded System

.598

1.671

Empowerment

.524

1.909

System Connection

.608

1.644

Strategic Leadership

.494

2.024

4.3.7 Reliability Test

Cronbach’s alpha reliability analysis is applied to test the internal consistency to respect multi-dimension. Nunnally (1967) and Shih and Fang (2004) minimum Cronbach’s alpha of reliability is sufficient above 0.6 for the early stage of the research.

Table 4.6

Descriptive Statistic of Reliability

Variables

Number of items

Cronbach’s alpha

Composite reliability

Continuous Learning

3

0.871

0.975

Inquiry and Dialogue

3

0.889

0.981

Team Learning

3

0.917

0.983

Embedded System

3

0.923

0.984

Empowerment

3

0.865

0.978

System Connection

3

0.923

0.984

Strategic Leadership

3

0.929

0.984

Organizational Innovativeness

11

0.934

0.991

Organizational Performance

9

0.920

0.989

As shown in Table 4.6 and Appendix H, each construct is Cronbach’s alpha reading with particular attribute to related ranging from 0.865 to 0.934.

Composite reliability is listed in Table 4.6. There is acceptable value that indicates a possible internal consistency. The calculation of composite reliability is based on the standardized factor loading resulted from the final modified structural model (refer to Appendix H). The formula of composite reliability is shown as follows:

Composite reliability = (∑ standardized loading) 2

(∑ standardized loading) 2 + €∑j

With respect of composite reliability and Cronbach’s Alpha value, George and Mallery (2003) indicated that reliability greater than 0.9 is considered to be excellent, greater than 0.8 is good, greater than 0.7 is acceptable, greater than 0.6 is questionable, and less than 0.5 is poor. Additionally, Sekaran (2000) indicated that the closer the reliability gets to one the better it is. Therefore, with a value between 0.983 to 0.991. The composite reliability of constructs are of an excellent standard. It is considered that any scores above 0.60 is of an acceptable standard (Nunnally, 1967). All reliability in this study are above the acceptable standard.

4.3.8 Validity Test

Validity refers to the accuracy of measurement, whether the conceptual and operational definitions are truly a reflection of the underlying concept to be measured (Burns & Bush, 1995; Neuman, 1994). There are three types of validity: content validity, construct validity, and criterion validity.

Content Validity

Content validity was used to represent the degree of accuracy between a set of measures and the concepts of interest (Cronbach & Meehl, 1955; Hair et al., 2010). Prior to launching the survey, the questionnaire was pretest and pilot test to validate content validity and was generated first in an English version and then translate into Thai. The process for the pilot test as described in Chapter 3 (refer to page 108) included two researchers and two owners from a sample in the pilot test. Their role was to ensure the clarity of each question. As a result, five questions were modified and included in the final questionnaire.

Construct Validity

Construct validity was used to confirm that the indicators aligned with the factors as they are measuring instrument adequacy (Schwab, 1980; O’Leary-Kelly & Vokurka, 1998; Cronbach & Meehl, 1955). This study performed construct validity for nine measurement constructs, that represent the theoretical latent, they are continuous learning, inquiry and dialogue, team learning, embedded system, empowerment, system connection, strategic leadership, organizational innovativeness, and organizational performance. Construct validity was evaluated by convergent validity, discriminant validity, and nomological validity.

(1b) Convergent Validity

Convergent validity is established by high factor loadings and high significant levels of the indicator variable (Schwab, 1980). In order to assess convergent validity, it is essential to evaluate the statistical significance of the estimated parameters between constructs and their items. This study used Confirmatory Factor Analysis (CFA) (refer to Table 4.7) to estimate the values of the factor loading between indicators and the factor. The factor loadings indicate the correlation between the indicators and the factor. The values of the factor loading should be greater than 0.50 for each indicator in the factor (Hair et al., 2010). A single-factor CFA is carried out only when feasible, given that CFA needs at least four items per latent variable to obtain degrees of freedom. When this condition was not achieved, the corresponding construct was allowed to correlate to another construct to obtain factor loadings (Anderson & Gerbing, 1988). Consequently, a single factor model was performed for organizational innovativeness and organizational performance, whereas the learning organization factors (continuous learning, inquiry and dialogue, team learning, embedded system, empowerment, system connection, and strategic leadership) were correlated.

Table 4.7

Convergent Validity – Confirmatory Factor Analysis (CFA)

Exogenous

Variables

Code

Indicators

Factor

Loading

Continuous

Learning (CL)

CL1

In my organization, people help each other learn.

0.818

(3 items)

CL2

In my organization, people take time to support learning.

0.849

CL3

In my organization, people are rewarded for learning.

0.828

Inquiry and

Dialogue (ID)

ID1

In my organization, people give open and honest feedback to each other.

 0.910

(3 items)

ID2

In my organization, whenever people state their view, they also ask what others think.

0.800

 

ID3

In my organization, people spend time building trust with each other.

0.859 

Team

Learning (TL)

TL1

In my organization, people have the freedom to adapt their goals as needed.

0.876

(3 items)

TL2

In my organization, people revise thinking as a result of organization discussions or information collected.

0.939

 

TL3

In my organization, we are confident that the organization will act on our recommendations.

0.845 

Embedded

System (ES)

(3 items)

ES1

My organization creates systems to measure gap between current and expected performance.

0.899 

ES2

My organization makes its lessons learned available to all employees.

0.897

 

ES3

My organization measures the results of the time and resources spent on training and learning.

0.886 

Empowerment (EM)

(3 items)

EM1

My organization recognizes people for taking initiative.

0.854

EM2

My organization gives people control over the resources they need to accomplish their work.

0.862

 

EM3

My organization supports members who take calculated risks.

0.769

Table 4.7 (Continued)

Convergent Validity – Confirmatory Factor Analysis (CFA)

Exogenous

Variables

Code

Indicators

Factor

Loading

System

Connection (SC)

SC1

My organization encourages people to think from a global perspective.

0.888

(3 items)

SC2

My organization works together with the outside community or other outside resources to meet mutual needs.

0.918

SC3

My organization encourages people to get answers from multiple locations and perspectives when solving problems.

0.877

Strategic

Leadership (SL)

SL1

In my organization, leaders mentor and coach those they lead.

0.869

(3 items)

SL2

In my organization, leaders continually look for opportunities to learn.

0.930

SL3

In my organization, leaders ensure that the organization’s actions are

0.912

Organizational

Innovativeness

OI1

Management actively seeks innovative ideas.

0.809

(11 items)

OI2

Innovation is readily accepted in program/project management.

0.751

OI3

Technical innovation, based on research results, is readily accepted.

0.762

 

OI4

Innovation in this business unit is perceived as too risky and is resisted.

0.761

 

OI5

In new product and service introductions, our company is often first-to-market.

0.734

 

OI6

Our new products and services are often perceived as very novel by customers

0.745

 

OI7

In comparisons with our competitors, our company has introduced more innovative products and services during the past five years.

0.771

 

OI8

In comparisons with our competitors, our company has lower success rate in new products and services launch.

0.773

Table 4.7 (Continued)

Convergent Validity – Confirmatory Factor Analysis (CFA)

Exogenous

Variables

Code

Indicators

Factor

Loading

Organizational

Innovativeness

OI9

We are constantly improving our business processes.

0.719

OI10

Our company changes production methods at a great speed in comparison with our competitors.

0.711

OI11

During the past five years, our company has developed many new management approaches.

0.707

Organizational

Performance (OP)

OP1

In my organization, return on investment is greater than last year

0.780

(9 items)

OP2

In my organization, sales growth is greater than last year

0.769

OP3

In my organization, average productivity per employee is greater than last year.

0.648

 

OP4

In my organization, time to market for products and services is less than last year.

0.773

 

OP5

In my organization, take care for customer complaints/needs is better than last year.

0.764

 

OP6

In my organization, the cost per business transaction is less than last year.

0.680

 

OP7

In my organization, market share is greater than last year.

0.811

 

OP8

In my organization, the profit volume is greater than last year.

0.773

 

OP9

In my organization, the additional capital is greater than last year.

0.752

 

Cite This Work

To export a reference to this article please select a referencing stye below:

Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.

Related Services

View all

DMCA / Removal Request

If you are the original writer of this essay and no longer wish to have your work published on UKEssays.com then please: