Disclaimer: This is an example of a student written essay.
Click here for sample essays written by our professional writers.

Any opinions, findings, conclusions or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of UKEssays.com.

Literature Review on Metamaterial

Paper Type: Free Essay Subject: Technology
Wordcount: 1731 words Published: 21st Jun 2018

Reference this

LITERATURE REVIEW ON METAMATERIAL

The Left-Handed Metamaterial (LHM) has a few unique properties such as negative refraction and backward wave. In this chapter, the basic theories behind their unique properties are presented and some applications of LHM toward the antenna application are discussed.

DEFINITION & BACKGROUND OF LEFT-HANDED METAMATERIAL

Electromagnetic Metamaterial can be defined as artificial effective homogenous electromagnetic structures with unusual properties not readily found in nature . A Left-Handed Metamaterial (LHM) [17][18]or Double Negative Metamaterial (DNG) is an electromagnetic Metamaterial that exhibit negative permittivity and permeability. This phenomenon can be characterized by the negative refraction index and the anti-parallel phase velocity which is also known as backward wave.

Get Help With Your Essay

If you need assistance with writing your essay, our professional essay writing service is here to help!

Essay Writing Service

HISTORY OF LEFT-HANDED METAMATERIAL (LHM)

The initial work on LHM was started by V. G. Veselago from the Lebedjev Physical Institute in Moscow when he made a theoretical speculation of this artificial material that exhibit negative permittivity and negative permeability. Veselago speculation remain silent for 29 years until 1996, J. B. Pendry from Imperial College London and his co-author form GEC-Marconi published a paper about artificial metallic construction which exhibit negative permittivity and negative permeability. Following this interesting discovery, in 2001, the first experimental verification was made by Shelby, Smith and Schultz at the University of California. The left handed material structure consists of split ring resonator and thin wire inspired by J. B. Pendry as shown in figure 3.1.

Figure 3.1: First experimental LHM structure

Since the introduction of LHM twelve years ago, many researchers were interested in investigating this artificial material and several of them was using LHM to improve the properties of the microwave devices such as antennas and filters. Many papers have been published regarding the LHM integrated with antennas and their properties have been analyzed. The focusing affect of LHM has made a low gain antenna becomes directive and have an increment of gain.

FEATURES OF METAMATERIAL

  • Improvement in the performance of a small monopole antenna, realized via the use of an ENG envelope that compensates for its high capacitive reactance.
  • Lens effect produced by DNG slabs that are useful for enhancing the directivities of a small antennas, e.g. dipole and Microstrip patches, by collimating the cylindrical waves emanating from these antennas and focusing them at infinity.
  • Creation of super lenses which can have a spatial resolution below that of the wavelength.

UNIQUE PROPERTIES OF LEFT-HANDED METAMATERIALS

Negative Refractive Index: For conventional material with 𝜀r > 0 and 𝜇r > 0, the refractive index is given𝑛=√𝜇𝑟𝜀𝑟, so that the conventional material possesses a positive refractive index. Yet, Left-handed Meta-material has both negative permittivity (𝜀r 𝜔 <0) and negative permeability (𝜇r 𝜔 <0), the refractive index n has negative value [8]. Inverse Snell's law: An incident light that enters left-handed meta-materials from a right-handed medium will undergo refraction, but opposite to that usually observed for two right handed media.

The Snell's law is described as

..3.3.1(a)

Where 𝜃2 the incident is angle and 𝜃1 is the refraction angle. Supposing medium I and medium II are conventional materials with 𝑛1>0 and 𝑛2>0 respectively, them refracted light will be bent with positive μ with the normal line OO' as indicated by the 4th light ray in figure3.2. If medium II is a left-handed meta-material with 𝑛2<0, the refracted light will be bent in odd way with a negative angle with OO' as indicated by the 3rd light ray in figure 3.2

Figure 3.2 Passage of a light ray through the boundary between medium I with positive refractive index 𝒏𝟏>0 and medium II with refractive index 𝒏𝟐.

The phase velocity expression ðœ-𝑝=𝑐𝑛 𝜔 shows that the phase velocity ðœ-𝑝 is related to the index of refraction , here c denotes the speed of light in a vacuum. For LHM has negative refractive index (𝑛 𝜔 <0), the phase velocity has negative value. In LHM, the phase velocity is in the opposite direction of the energy flow in the sense that the energy flow leaves the source in waves with a phase velocity pointing backward as shown in figure 3.3.

Figure 3.3: The energy flow and group velocity propagate forward in LHMs but the phase velocity is backward

Veselago also predicted that the Doppler and Cerenkov effects will be reversed in LHM. An approaching source will appear to radiate at a lower frequency and charged particles moving faster than the speed of light in the medium will radiate in a backward cone, not a forward cone. These two exotic properties are not employed in this Dissertation, however details about them can be found in.

LEFT-HANDED METAMATERIAL STRUCTURE

The first LHM structure consists of split ring resonator (SRR) and thin wire (TW) or capacitance loaded strip (CLS)[19]. The SRR exhibits the negative value of permeability and the CLS and TW exhibit the negative value of permittivity in a certain range of frequency.

Split Ring Resonator (SRR)

  1. (b)

Figure 3.4: (a) Circular split ring resonator and (b) Square split ring resonator

A split ring resonator (SRR) as shown in figure3.4 is part of the LHM structure that exhibit negative value of permeability. If the excitation of the magnetic field is perpendicular to plane of the structure, this will generate the magnetic dipole moment. The SRR is a highly conductive structure in which the capacitance between the two rings balances its inductance . The SRR induces high current density structure which creates a large magnetic moment.

Capacitance Loaded Strip (CLS) and Thin Wire (TW)

(a) (b)

Figure 3.5: (a) Capacitance loaded strip (CLS) and (b) Thin wire (TW)

figure 3.5(a) shows the capacitance loaded strip (CLS) and figure 3.5(b) shows the thin wire (TW). CLS and TW would produce strong dielectric like response. As electric field propagates parallel through the TW or CLS, it will induce a current along them. This will generate an electric dipole moment to the structure and exhibit a plasmonic-type of permittivity frequency .

Find Out How UKEssays.com Can Help You!

Our academic experts are ready and waiting to assist with any writing project you may have. From simple essay plans, through to full dissertations, you can guarantee we have a service perfectly matched to your needs.

View our services

CST SOFTWARE

CST was founded in 1992 byThomas Weiland. The main product of CST is CST STUDIO SUITE,which comprises A various modules dedicated to specific application areas. There are modules for microwave & RF applications, summarized in CST MICROWAVE STUDIO, low frequency (CST EM STUDIO), PCBs and packages (CST PCB STUDIO), cable harnesses (CST CABLE STUDIO), temperature and mechanical stress (CST MPHYSICS STUDIO) and for the simulation of the interaction of charged particles and electromagnetic fields (CST PARTICLE STUDIO). All modules are integrated with a system and circuit simulator (CST DESIGN STUDIO). The version is CST Microwave Studio 2010.

 

Figure 3.6 CST Microwave Studio

In next chapter, the design of the LHM is discussed and the procedure in the simulation of the LHM using CST software is elaborated thoroughly. Besides that, the design of the Metamaterial structures, patch Microstrip antennas are also elaborated.

CST Microwave Studio is a fully featured software package for electromagnetic analysis and design in the high frequency range. It simplifies the process of inputting the structure by providing a powerful solid modeling front-end which is based on the ACIS modeling kernel. Strong graphic feedback simplifies the definition of Your device even further. After the component has been modeled, a fully automatic meshing procedure (based on an expert system) is applied before the simulation engine is started. The simulators feature the Perfect Boundary Approximation (PBA™ method) and its Thin Sheet Technique (TST™) extension, which increases the accuracy of the simulation by an order of magnitude in comparison to conventional simulators. Since no method works equally well in all application domains, the software contains four different simulation techniques (Transient solver, Frequency domain solver, Eigenmode solver, Modal analysis solver) which best fit their particular applications.

The most flexible tool is the transient solver, which can obtain the entire broadband frequency behavior of the simulated device from only one calculation run (in contrast to the frequency stepping approach of many other simulators). This solver is very efficient for most kinds of high frequency applications such as connectors, transmission lines, filters, antennas and many more.

 

Cite This Work

To export a reference to this article please select a referencing stye below:

Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.

Related Services

View all

DMCA / Removal Request

If you are the original writer of this essay and no longer wish to have your work published on UKEssays.com then please: